Your location: The Papier Mache ResourceForum

Forum

Note: The forum uses a separate login system to the galleries.

You are not logged in.

Options

Question about using marine varnish

#1 2007-02-05 17:04:24

butterbee
Member
From: Ontario, Canada
Registered: 2005-04-08
Posts: 208

Question about using marine varnish

I have a piece that will be used inside my apartment.  Do I need to seal it more than once?

(It is a storage box, and I have company coming soon and I'd love to use it right away to make my messy corner of the living room look more clean.)

So, I guess what I am asking is that is it necessary or good practice to varnish an indoor project more than once?

Offline

 

#2 2007-02-05 17:32:29

Jackie
Moderator
From: England
Registered: 2002-09-14
Posts: 389
Website

Re: Question about using marine varnish

You won't need marine varnish for an indoor project. You would be much better off using a polyurethane varnish as this will give a tougher, more durable protective coat. It is always a good idea to use 2/3 coats with any varnish. Not my favourite job, varnishing! I usually try to do it outside because of the fumes.


Jackie

Offline

 

#3 2007-02-05 17:37:33

butterbee
Member
From: Ontario, Canada
Registered: 2005-04-08
Posts: 208

Re: Question about using marine varnish

Thanks Jackie!

Oops, I didn't know I was going overkill with an indoor project. (*blushes*)

So, I need a polyurethane varnish instead? Gotcha. I'll make sure to use that from now on.

I wish I could do it outside, but it is -29 here with the wind chill factor today!

Offline

 

#4 2007-02-05 20:12:35

CatPerson
Moderator
From: Washington State, U.S.A.
Registered: 2006-01-09
Posts: 1314

Re: Question about using marine varnish

Jackie's correct.  And make those 2 or 3 coats THIN coats, or it will take forever to dry.

Sue, who is from California, and can't even IMAGINE low temps like you've got!  Brrrrr!

Offline

 

#5 2007-02-06 20:10:07

butterbee
Member
From: Ontario, Canada
Registered: 2005-04-08
Posts: 208

Re: Question about using marine varnish

2 or 3 THIN coats. Gotcha Sue!

I was wondering how thick I should be putting to coats on. Thanks for reading my mind.  big_smile

Offline

 

Board footer

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson